Welcome To the Windows
98 section of the Support Site.
MODEM HELP
This page is ONLY
for the advanced user. If you have any questions about this
page, CLICK HERE.
USRobotic
(Telepaths) Modems S32=98
| |
x2 on, V.90 off |
x2 off, V.90 on |
Both off |
Both on* |
| Sportster** |
S32=66 |
S32=34 |
S32=98 |
S32=2 |
| Courier |
S58=32 |
S58=1 |
S58=33 |
S58=0 |
To decrease the speed of the modem and disable
56k use the following string :
&F1&U1&N16S32=98
U1 = the floor connect speed at 2400 meaning the
modem knows not to go lower than that.
N16 = the ceiling connect speed or the highest
the modem will connect at as described below.
16= 33,600
8 = 14,400
3 = 2400 ** this is the lowest you can go - from this setting its line
noise.
* Using AT&F1 in the init string automatically enables both
protocols.
**Non-U.S. Robotics modems that use x2 generally use the same commands
as the Sportster
Rockwell
+MS=11,1
~Bocca
~Nobel Links
~Creative Modem Blaster V90
D15635
~DSI d-f-v V.90 DI 3635
~Modem Blaster Flash 56 II
| V.90 preferred
(K56flex will still work)* |
+MS=12,1 |
| V.90 only, K56flex
and V.34 disabled* |
+MS=12,1,34667,56000 |
| K56flex preferred
(V.90 will still work)* |
+MS=56,1 |
| K56flex only, V.90
and V.34 disabled* |
+MS=56,1,34000,56000 |
| Disable V.90 and
K56flex, use V.34 (28.8/33.6) |
+MS=11,1 |
Rockwell HCF
+MS=V34
~Supra Max 56k** (AT&FW2+MS=V34
for this modem this is the string)
~Cirrus CLM data/fax/voice
V90
~MPD 3858-u
~Rockwell V90 DSL 56k data/fax PCI Modem
~56k Internet Fax (only
from Gateway)
~WIN5602 Voice Modem (from Tiger Direct
- you get these thru FingerHut)
| V.90 preferred
(K56flex will still work) |
+MS=V90 |
| K56flex preferred
(V.90 will still work) |
+MS=K56FLEX |
| Disable V.90 and
K56flex, use V.34 (28.8/33.6) |
+MS=V34 |
To decrease the speed of the modem and disable
56k use the following string :
+MS=V34,0,2400,X
*** X = the ceiling or highest connect
speed. Insert your own speed here -
example - 33600 or 28800 or 14400 or 2400
LT (win modems){Lucent Technologies} S38=0-V90=0
~Telepath 56k Modems (usually
from Gateway)
~Compaq 56k - DF
~Toshiba internal V90 modem
~V90 PCI Windows Modem (LHT)
~ActionTec PCI 56k Modem (chipset is a Lucent
Venus, so the string is S38=0S109=0)
~ZOOM 56K PCI
~MDP7800 V-U Modem
~Viking WinModem
| Enable
V.90 |
-V90=1 |
| Disable V.90 |
-V90=0 |
| See current -V90
setting with explanation |
-V90? in a terminal |
| Enable K56flex |
S38=1 |
| Disable K56flex |
S38=0 |
For PC-TELL
chipsets S37=12
~HSP MicroModem 56
~HSP Audio Modem Riser
~MSP5900 - U Modem
| V90 and K56Flex
off (V34) |
S37=12 |
| |
|
For Venus
chipsets (mostly used in external modems): S109=0
/or/ S109=2
OR
s109=0s37=19s38=0
| K56flex only (V.90
disabled) |
S109=0 |
| K56flex or V.90* |
S109=1 |
| V.90 only (K56Flex
disabled) |
S109=2 |
The Motorola SM 56k modem is an
HSP based modem.
| Disable
v.90 |
at*mm15 |
| K56Flex |
at*mm14 |
